EASYdrive CANopen

CANopen interface card for EASYdrive. The CANopen bus system belongs to the fieldbus family and is based on the CAN bus (Controller Area Network). As a rule, the network is built up in a linear structure. The maximum data transfer rate on a CANopen bus can be up to 1 Mbit / s and depends on the cable length. A maximum of 127 participants may exist in the bus association. Including M12 connection cable open 2 m, M12 connector / open / CANopen / 5-pin / 2 m / A-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€50.75*

Details

EASYdrive EtherCAT

EtherCAT interface card for EASYdrive. The EtherCAT bus system belongs to the fieldbus family. Usually the network is in linear structure. The maximum data transfer rate on an EtherCAT bus can up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

EASYdrive Profibus

Profibus interface card for EASYdrive. Communication interface. With the help of PROFIBUS, devices from different providers can be customized communicate. PROFIBUS independently distinguishes between master and slave devices, so that multi-master operation is also possible. Including M12 connection cable open 2 m, M12 connector / open / Profibus / 5-pin / 2 m / B-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

EASYdrive PROFINET

PROFINET interface card for EASYdrive The PROFINET bus system belongs to the fieldbus family. As a rule, the network is built up in a linear structure. The maximum data transfer rate on a PROFINET bus can be up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. Please note that the incoming bus line is connected to the "In" socket and the outgoing line to the "Out" socket . If it is the last participant, the "Out" socket must be left blank - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

EASYdrive Sercos III

Sercos III interface card for EASYdrive. The Sercos III bus system belongs to the fieldbus family. Usually the network built in a linear structure. The maximum data transfer rate on a Sercos III bus can be up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

ED-Modbus

Modbus RTU interface card for EASYdrive The MODBUS bus system belongs to the fieldbus family. As a rule, the network is built up in a linear structure. The maximum data transfer rate on a MODBUS can be up to 115.2 kbit / s. The fieldbus cable is only connected via the M12 connector on the front or . If the fieldbus line is to be forwarded to another subscriber, an M12 T distributor must be used. The bus must be terminated with a terminating resistor. The interface card is part of the converter. All product photos are non-binding examples! Technical changes reserved.

€0.01*

Details

LS CANOpen

LS CANOpen interface card only for S100, IS7, IP5A or G100. Please select series. All product photos are non-binding examples! Technical changes reserved.

€124.71*

Details

LS EtherCAT

LS EtherCAT interface card only for S100. All product photos are non-binding examples! Technical changes reserved.

€164.62*

Details

LS IP5A-modbus

Modbus interface card for IP5A. Communication interface.

€310.14*

Details

LS Profibus

LS Profibus interface card only for S100, IS7 or G100. Please select series. All product photos are non-binding examples! Technical changes reserved.

From €174.60*

Details

LS PROFINET

Series: iS7

LS PROFINET interface card only for S100 or IS7. Please select series. All product photos are non-binding examples! Technical changes reserved.

€181.00*

Details

Frequency inverter interface cards

Our company specializes in comprehensive challenges in the field of electrical drive technology, the focus on frequency converters, three-phase motors and geared motors. Of course, we offer to ours Products also the necessary accessories. As an illustration, we have a corresponding accessory overview page set up. Here you can find, for example, the necessary potentiometer, shielded connection cable, the mounting adapters, control cables, braking resistors, EMC filters, RCCBs for frequency converters and much more. In the listed here, Different interface cards / fieldbus systems for frequency inverters can be selected in the category.

Buy frequency inverter

We are the ideal partner for you, with decades of experience and a large warehouse. Most of the time we can immediately cover the short-term needs. Best quality, a competent team and a market-driven price in the foreground for us. If you cannot find your frequency inverter here in the online shop, we ask for yours Inquiry by email or just contact us directly by phone.