MV-F002/B5+V05-71-4 - 0,37 kW – 14-29 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 14 - 29 rpm, Reduction with adjustment unit (i)= 10 – 48, only Ratio gear(i)= 6,91,
Torque (M²)= 17 - 34 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€739.35*
MV-F002/B5+V05-71-4 - 0,37 kW – 21-100 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 21 - 100 rpm, Reduction with adjustment unit (i)= 14 – 69, only Ratio gear(i)= 9,87,
Torque (M²)= 24 – 48 Nm, Service factor (fs)= 1.6 - 3.3, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€739.35*
MV-F002/B5+V05-71-4 - 0,37 kW – 26-127 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 26 - 127 rpm, Reduction with adjustment unit (i)= 11 – 54, only Ratio gear(i)= 7,84,
Torque (M²)= 19 - 38 Nm, Service factor (fs)= 1.9 – 3.8, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€739.35*
MV-F002/B5+V05-71-4 - 0,37 kW – 37-175 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 37 - 175 rpm, Reduction with adjustment unit (i)= 8 - 38, only Ratio gear(i)= 5,57,
Torque (M²)= 13 - 26 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€739.35*
MV-F002/B5+V05-71-4 – 0,37kW – 52-233 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0,37 kW, Speed= 52-233 rpm, Reduction with adjustment unit (i)= 6 - 27, only Ratio gear(i)= 3,90,
Torque (M²)= 9 -18 Nm, Service factor (fs)= 2.0 – 4.0, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€739.35*
MV-F002/B5+V10-80-4 - 0,55 kW – 18-87 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.55 kW, Speed= 18 - 87 rpm, Reduction with adjustment unit (i)= 16 - 77, only Ratio gear(i)= 11,14,
Torque (M²)= 40 - 80 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 22.2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€839.93*
MV-F002/B5+V10-80-4 - 0,55 kW – 27-127 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.55 kW, Speed= 27 - 127 rpm, Reduction with adjustment unit (i)= 11 – 52, only Ratio gear(i)= 7,45,
Torque (M²)= 27 - 54 Nm, Service factor (fs)= 1.3 -2.7, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= ca.22.2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€839.93*
MV-F002/B5+V20-90L-4 - 1,5 kW – 37-218 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 37 - 218 rpm, Reduction with adjustment unit (i)= 6.4 – 37.4, only Ratio gear(i)= 4,56,
Torque (M²)= 45 – 90 Nm, Service factor (fs)= 0.65 – 1.3, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,058.18*
MV-F002/B5+V20-90L-4 - 1,5 kW – 47-276 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 47 - 276 rpm, Reduction with adjustment unit (i)= 5.06 – 29.6, only Ratio gear(i)= 3,62,
Torque (M²)= 36 - 72 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 29,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,058.18*
MV-F003/B5+V05-71-4 - 0,25 kW – 10-48 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.25 kW, Speed= 10 - 48 rpm, Reduction with adjustment unit (i)= 28.9 – 144.6 only Ratio gear(i)= 20,66,
Torque (M²)= 33 – 66 Nm, Service factor (fs)= 1.2 – 2.4, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€738.26*
MV-F003/B5+V05-71-4 - 0,25 kW – 6,5-31 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.25 kW, Speed= 6.5 - 31 rpm, Reduction with adjustment unit (i)= 44.8 - 224, only Ratio gear(i)= 32,02,
Torque (M²)= 51 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€738.26*
MV-F003/B5+V05-71-4 - 0,25 kW – 8,5-41 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.25 kW, Speed= 8.5 - 41 rpm, Reduction with adjustment unit (i)= 33.8 – 168.9, only Ratio gear(i)= 24,13,
Torque (M²)= 58 - 116 Nm, Service factor (fs)= 1.0 – 2.1.Type= B3 (B35 gegen Aufpreis), Welle= 20x40 mm,
Weight= 20 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€738.26*
MV-F003/B5+V05-71-4 - 0,37 kW – 10-48 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 0.37 kW, Speed= 9 - 48 rpm, Reduction with adjustment unit (i)= 29 - 144, only Ratio gear(i)= 20.66,
Torque (M²)= 49 - 100 Nm, Service factor (fs)= 0.85 - 1.7, Type = B3 (B35 for an extra charge), Shaft= 20x40 mm,
Weight= 20.7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED.
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€746.01*
MV-F102/B5+V20-90L-4 - 1,5 kW – 37-218 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 37 - 218 rpm, Reduction with adjustment unit (i)= 6.4 – 37.5, only Ratio gear(i)= 4,57,
Torque (M²)= 45 - 90 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 31,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,104.83*
MV-F102/B5+V20-90S-4 - 1,1 kW – 31-181 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.1 kW, Speed= 31 - 181 rpm, Reduction with adjustment unit (i)= 7.7 – 44.8, only Ratio gear(i)= 5,47,
Torque (M²)= 39 – 78 Nm, Service factor (fs)= 1.0 – 2.0, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 28,7 kg, Paint= RAL5010, ,Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,064.98*
MV-F172/B5+V30-100-4 - 2,2 kW – 30-152 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 2.2 kW, Speed= 30 - 152 rpm, Reduction with adjustment unit (i)= 9.2 – 46.2, only Ratio gear(i)= 6,60,
Torque (M²)= 96 – 192 Nm, Service factor (fs)= 0.75 – 1.5, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 37,2 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,402.21*
MV-F172/B5+V30-100-4 - 3,0 kW – 42-208 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 42 - 208 rpm, Reduction with adjustment unit (i)= 6.7 – 33, only Ratio gear(i)= 4,78
Torque (M²)= 95 - 190 Nm, Service factor (fs)= 0.7 – 1.4, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 40.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,458.54*
MV-F172/B5+V30-100-4 - 3,0 kW – 59-297 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 59 - 297 rpm, Reduction with adjustment unit (i)= 4.7 – 23.6, only Ratio gear(i)= 3,38,
Torque (M²)= 67 – 134 Nm, Service factor (fs)= 0.8 – 1.6, Type = B3 (B35 for an extra charge), Shaft= 25x50 mm,
Weight= 40.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,458.54*
MV-F202/B5+V20-90S-4 - 1,1 kW – 7,5-43 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.1 kW, Speed= 7.5 - 43 rpm, Reduction with adjustment unit (i)= 32.2 – 188.7, only Ratio gear(i)= 23,01,
Torque (M²)= 165 - 330 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,
Weight, = 34,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,235.74*
MV-F202/B5+V20-90S-4 - 1,1 kW – 9-53 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.1 kW, Speed= 9 - 53 rpm, Reduction with adjustment unit (i)= 26.4 – 154.5, only Ratio gear(i)= 18,85,
Torque (M²)= 135 - 270 Nm, Service factor (fs)= 0.95 – 1.9, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,
Weight, = 34,7kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,235.74*
MV-F202/B5+V30-100-4 - 3,0 kW – 44-222 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 44 - 222 rpm, Reduction with adjustment unit (i)= 6.3 – 31.5, only Ratio gear(i)= 4,50,
Torque (M²)= 89 – 178 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 30x60 mm,
Weight= 45,5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€2,303.96*
MV-F272/B5+V20-90L-4 - 1,5 kW – 0,6-38 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 1.5 kW, Speed= 0.7 - 38 rpm, Reduction with adjustment unit (i)= 36.2 – 212.3, only Ratio gear(i)= 25,89,
Torque (M²)= 254 - 508 Nm, Service factor (fs)= 0.9 – 1.8, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm,
Weight, = 43,4 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,348.90*
MV-F272/B5+V30-100-4 - 3,0 kW – 17-83 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 17 - 83 rpm, Reduction with adjustment unit (i)= 16.7 – 83.6, only Ratio gear(i)= 11,95,
Torque (M²)= 236 - 472 Nm, Service factor (fs)= 0.85 – 1.7, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm,
Weight, = 50.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,681.78*
MV-F272/B5+V30-100-4 - 3,0 kW – 32-160 rpm Helical geared motor speed variator
Helical geared motor with possibility of flange mounting from B3 to B35,
Voltage = 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency = 50/60 Hertz.
Power= 3.0 kW, Speed= 32 - 160 rpm, Reduction with adjustment unit (i)= 8.7 – 43.4, only Ratio gear(i)= 6,21,
Torque (M²)= 123 - 246 Nm, Service factor (fs)= 1.35 – 2.7, Type = B3 (B35 for an extra charge), Shaft= 35x70 mm,
Weight, = 50.5 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors, Operating mode= S1- 100% ED,
The variable Speed motor should not be operated with a frequency converter and corresponds to the IEC 60034-30: 2008.
The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364
all work on the electric drive must only be carried out by qualified specialist personnel.
The Speed adjustment is only allowed when the engine is running. Do not adjust when standing!
When ordering, please select the desired mounting position!
All product photos are non-binding examples!
€1,681.78*
Gear motor and handwheel adjustment
Our general range of geared motors includes controllable drives. Thus, a variable-speed adjustment unit can be integrated with several gearbox sizes. We offer this with an integrated adjusting gear, which is mounted between the electric motor and the actual gearbox and is to be controlled by a handwheel. Furthermore, we offer the version with a frequency inverter, which is mounted directly on the electric motor. The speed control can be done via the potentiometer or via the PC. These options apply to our complete gear range, for worm geared motors, helical geared motors, geared motors, planetary geared motors and bevel geared motors. You order and buy drives of the highest quality from us. They are characterized by high performance and long life / durability.
Application examples
Variable speed worm geared motors are used extensively, such as on or around large spits, shredders, agitators, presses, augers, dosing screws, grain crushers, belt conveyors, chain conveyors, orators, conveyor spirals, belt dryers, feed silos, car washes, packaging machines, sawmills, etc Conveyor technology, the food industry and generally in plant and mechanical engineering.
Gear motor purchase advice
Especially with the purchase of a geared motor with integrated control unit, professional support is indispensable. Especially we would like to point out our telephone advice and assistance with the product decision. In addition, we can offer a short delivery time due to a large worm gear bearing.
SEO= Gear motor + handwheel adjustment, Spur gear motor + handwheel adjustment