JS-PV1101L.01-100-4-2.2 kW-200 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 2.2 kW, Speed (n²)= 200 rpm, Ratio (i)= 7.25, Torque (M²)= 99 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 42 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,116.83*
JS-PV1101L.01-100-4-2.2 kW-281 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 2.2 kW, Speed (n²)= 281 rpm, Ratio (i)= 5.17, Torque (M²)= 71 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 42 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,116.83*
JS-PV1101L.01-100-4-2.2 kW-384 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 2.2 kW, Speed (n²)= 384 rpm, Ratio (i)= 3.78, Torque (M²)= 52 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 42 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,116.83*
JS-PV1101L.01-100-4-3.0 kW-200 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 3.0 kW, Speed (n²)= 200 rpm, Ratio (i)= 7.25, Torque (M²)= 135 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 44 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,147.39*
JS-PV1101L.01-100-4-3.0 kW-242 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 3.0 kW, Speed (n²)= 242 rpm, Ratio (i)= 6.00, Torque (M²)= 113 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 44 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,147.39*
JS-PV1101L.01-100-4-3.0 kW-352 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 3.0 kW, Speed (n²)= 352 rpm, Ratio (i)= 4.13, Torque (M²)= 78 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 44 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,147.39*
JS-PV1101L.01-112-4-4.0 kW-201 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 4.0 kW, Speed (n²)= 201 rpm, Ratio (i)= 7.25, Torque (M²)= 179 Nm,
Operating factor (fs)= 3.2, Type= B5, Shaft= 50 mm x 82 mm, Weight= 57 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,208.48*
JS-PV1101L.01-112-4-4.0 kW-283 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 4.0 kW, Speed (n²)= 283 rpm, Ratio (i)= 5.17, Torque (M²)= 129 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 57 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,208.48*
JS-PV1101L.01-132-4-5.5 kW-201 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 5.5 kW, Speed (n²)= 201 rpm, Ratio (i)= 7.25, Torque (M²)= 247 Nm,
Operating factor (fs)= 2.3, Type= B5, Shaft= 50 mm x 82 mm, Weight= 67 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,323.66*
JS-PV1101L.01-132-4-5.5 kW-283 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 5.5 kW, Speed (n²)= 283 rpm, Ratio (i)= 5.17, Torque (M²)= 177 Nm,
Operating factor (fs)= 3.8, Type= B5, Shaft= 50 mm x 82 mm, Weight= 67 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,323.66*
JS-PV1101L.01-132-4-5.5 kW-386 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 5.5 kW, Speed (n²)= 386 rpm, Ratio (i)= 3.78, Torque (M²)= 130 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 67 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,323.66*
JS-PV1101L.01-132-4-7.5 kW-202 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 7.5 kW, Speed (n²)= 202 rpm, Ratio (i)= 7.25, Torque (M²)= 335 Nm,
Operating factor (fs)= 1.7, Type= B5, Shaft= 50 mm x 82 mm, Weight= 77 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
From
€1,338.29*
JS-PV1101L.01-132-4-7.5 kW-284 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 7.5 kW, Speed (n²)= 241 rpm, Ratio (i)= 5.17, Torque (M²)= 241 Nm,
Operating factor (fs)= 2.8, Type= B5, Shaft= 50 mm x 82 mm, Weight= 77 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
From
€1,338.29*
JS-PV1101L.01-132-4-7.5 kW-388 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 7.5 kW, Speed (n²)= 388 rpm, Ratio (i)= 3.78, Torque (M²)= 177 Nm,
Operating factor (fs)= 3.6, Type= B5, Shaft= 50 mm x 82 mm, Weight= 77 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
From
€1,338.29*
JS-PV1101L.01-71-4-0,37 kW-198 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.37 kW, Speed (n²)= 198 rpm, Ratio (i)= 7.25, Torque (M²)= 17 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 34 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€894.27*
JS-PV1101L.01-71-4-0,37 kW-278 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.37 kW, Speed (n²)= 278 rpm, Ratio (i)= 5.17, Torque (M²)= 12 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 34 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€894.27*
JS-PV1101L.01-71-4-0,37 kW-380 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.37 kW, Speed (n²)= 380 rpm, Ratio (i)= 3.78, Torque (M²)= 8.9 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 34 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€894.27*
JS-PV1101L.01-80-4-0,55 kW-242 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.55 kW, Speed (n²)= 242 rpm, Ratio (i)= 6.00, Torque (M²)= 21 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 30 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€927.27*
JS-PV1101L.01-80-4-0,55 kW-352 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.55 kW, Speed (n²)= 352 rpm, Ratio (i)= 4.13, Torque (M²)= 14 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 30 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€927.27*
JS-PV1101L.01-80-4-0.75 kW-242 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.75 kW, Speed (n²)= 242 rpm, Ratio (i)= 6.00, Torque (M²)= 28 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 31 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€962.12*
JS-PV1101L.01-80-4-0.75 kW-281 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.75 kW, Speed (n²)= 281 rpm, Ratio (i)= 5.17, Torque (M²)= 24 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 31 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€962.12*
JS-PV1101L.01-80-4-0.75 kW-384 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 0.75 kW, Speed (n²)= 384 rpm, Ratio (i)= 3.78, Torque (M²)= 18 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 31 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€962.12*
JS-PV1101L.01-90L-4-1.5 kW-200 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 1.5 kW, Speed (n²)= 200 rpm, Ratio (i)= 7.25, Torque (M²)= 68 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 55 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,040.36*
JS-PV1101L.01-90L-4-1.5 kW-242 rpm Planetary gearmotor
Planetary gearmotor with IEC flange between gearbox and Three-phase motor,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.
Power= 1.5 kW, Speed (n²)= 242 rpm, Ratio (i)= 6.00, Torque (M²)= 56 Nm,
Operating factor (fs)= 4.0, Type= B5, Shaft= 50 mm x 82 mm, Weight= 55 kg, Paint= RAL5010.
Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).
As usual with planetary gears, the temperature development must be observed during operation. To in the gearboxavoid an overtemperature, a clarification in advance regarding the application is necessary.Please send us this Form filled out and returned.The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The Planetary gear can be operated in both directions and contains an oil filling on delivery.
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel
perform. For modifications or special designs please send inquiry.
When ordering, please select the desired installation position.
Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!
€1,040.36*
Planetary gear motors in various designs
JS planetary gear motors are available up to 75KW and are now used in a wide range of applications
requiring high torque and compact design. The modular planetary gears consist of sun, planets and
internal teeth. To cover the requirements in different work areas, the planetary gear units are available
in various design variants and with extensive accessories. Since the planetary gearboxes work in small
rooms with high torques, the gearboxes generate a correspondingly high thermal load due to their high
power density. Therefore, the gearbox must be checked for thermal performance. Planetary gears are
mainly used in mobile machines and have become established in cranes, metalworking machines,
construction machinery and wind turbines.
Planetary gear motors up to 50,000 Nm
- Ten sizes
- Nominal torques from 1000 Nm to 50,000 Nm
- Reductions from 3.5 to 3000
- Standard connection IEC B5 to electric motor possible
- Different cooling options
- Drive stage optionally with cone or worm wheel
- Connection to hydraulic motor possible
- Special waves, e.g. with multiple wedge profile according to DIN 5480 or DIN 5482 or with shrink disk
- Housing and flanges made of Spheroguss GGG40
- Standard sealing rings FKM and synthetic oil
- Standard protective cap for output seal
Various planetary gear types:
Options and accessories:
- IEC flange B5 for electric motor
- Various output flanges
- Shrink disc
- Backstop
- Air heat exchanger, water heat exchanger
- Temperature sensor, thermostat
- Oil flow meter, oil filter
- Special seals
- Oil sight glass
- Oil expansion
- Oil conservator
- Torque arm
- Electromagnetic or hydraulic brakes
SEO= Planetary geared motor 0.37kW - 55kW. Planetary gear motors in various designs