Go to homepage
£0.00*

MV-002-632 - 0.18kW-225rpm Helical-Gear-Motor

slide 2 of 6

£381.90*

Prices incl. VAT plus shipping costs

Delivery time Approx. 36 working days

Product number: A0002103100060A000TM
Shipping fees: Article + Packaging

Product information "MV-002-632 - 0.18kW-225rpm Helical-Gear-Motor"

Helical geared motor (gearbox with IEC flange to the ac-motor),

Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.

Power= 0.18 kW, Speed= 225 rpm, Ratio (i)= 6.0 Torque (M²)= 7 Nm, Service factor (fs)= 4.0

Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010.

Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable).

The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008.

The gear motor can be operated in both directions and contains an oil filling on delivery.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by

qualified specialist personnel. For modifications or special designs please send inquiry.

All product photos are non-binding examples! Technical changes reserved.

When ordering, please select the desired mounting position and design!

Delivery time: 5-6 weeks
Performance: 0,18 kW
Torque: up to 10 Nm
Rotation speed: 201 to 300 rpm
Shaft diameter: 20 mm
Series: M-series
Properties "MV-002-632 - 0.18kW-225rpm Helical-Gear-Motor"
Delivery time: 5-6 weeks
Performance: 0,18 kW
Torque: up to 10 Nm
Rotation speed: 201 to 300 rpm
Shaft diameter: 20 mm
Series: M-series

Accesories

slide 1 to 4 of 4
Frequency inverter LS 004M100
Frequency inverter LS 004M100
Frequency inverter , 0.4 kW, 230V, 2.4A, IP20, EMC filter integrated - EMC filter C2 - Potentiometer for speed control - Attachment to mounting plates or DIN rail - Side-by-side installation possible (2 mm distance between the FU) - Easy connection via RJ45 port - Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V) - Brake chopper for 1.5kW and 2.2kW versions - Overload capacity 150% for 1 min - Programming with DriveView9 operating software via RJ45 connection on the M100 (Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features: - DC braking - Jog operation - 3-wire operation - Dwell operation (dwell time operation) - Slip compensation - PID control - Energy saving operation - Speed search - Automatic restart 0.4kW frequency converter for 0.37 kW three-phase motor!

From £116.00*
Details
External fan unit size 63
External fan unit size 63
External fan, External fan unit, Motor size 63 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.15 A, 2950 rpm, 45 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.17 A, 3500 rpm, 45 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.18 A/0.10 A, 2950 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 120 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From £137.52*
Details
Frequency Inverter LS 0004S100-4EXFNS
Frequency Inverter LS 0004S100-4EXFNS
Frequency inverter, 0.4 kW, 380V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning. Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)                               

£423.16*
Details
Frequency Inverter LS 0004S100-4EOFNS
Frequency Inverter LS 0004S100-4EOFNS
Frequency converter, 0.4 kW, 3 x 400 Volt, IP20, built-in LED control panel, EMC filter (C3) Advanced sensorless control functions High starting torque of 200% even at 0.5 Hz High power density, compact dimensions, through-hole mounting Integrated EMC filter (C3) Compliance with global standards CE, UL, cUL Heavy duty 150% for 1 minute or normal duty 120% for 1 minute Autotuning function when stationary or rotating Optional protection class IP66/NEMA4X with integrated main switch (up to 22 kW) Safe stop "STO" integrated Torque Off), redundant input circuitry Integrated display with easy operation, external remote display possible Smart copy function, which does not require the S100 to be powered on Simple fan replacement, with the replacement time displayed automatically PLC sequences programmable with function blocks Digital and analog I/O, Modbus TCP, Ethernet/IP, Profibus DP, CANopen (in preparation: Profinet, EtherCAT)                           

£227.84*
Details

Engine options

slide 1 to 2 of 2
230V-Option 0.18 kW – 4pol for M-Serie
230V-Option 0.18 kW – 4pol for M-Serie
single-phase option in 1x230V-50Hz, for helical geared reducer motors with 3x230/400V-50Hz mit 0,18kW-Motor in 4pole version, mit Operating and starting capacitor. ! Always operate drive only under load, starting torque lower than with three-phase motor !  ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examples!optional:On / off switch with reversing switch for left / right rotation, undervoltage release,Collar plug = 1 x 230 V, switching capacity = 16 A, ambient temperature = -5 ° C to + 40 ° C,Line between motor and switch housing = approx. 90 cm.  

From £20.27*
Details
Brakemotor-Option 0.18 kW – 4pol for M-Serie
Brakemotor-Option 0.18 kW – 4pol for M-Serie
Brakemotor-Option 0.18 kW – 4pol for helical gear reducer motors. Brake= 4 Nm 230V with rectifire. ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examplesAll product photos are non-binding examples!  

£189.19*
Details