Close filters
  •  
  •  
  •  
  •  
  •  
  •  
  •  
  •  
No results were found for the filter!
Helical-Gear-Motor- JS-MV572-200L-30kW-118rpm Helical-Gear-Motor- JS-MV572-200L-30kW-118rpm
37kW Helical geared motor (gearbox with IEC flange to the ac-motor), Condition = very good, unused! Power= 37 kW, Speed= 143 rpm, Ratio (i)= 9,79, Torque (M²)= 2397 Nm, Service factor (fs)= 2,0. Type = B3, Shaft = 90mm x 140mm, Weight=...
€3,412.36 * €4,464.64 *
Helical-Gear-Motor- JS-MV772-225M-45kW-101rpm Helical-Gear-Motor- JS-MV772-225M-45kW-101rpm
Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz. Power= 45.0 kW, Speed= 101 rpm, Ratio (i)= 14,54, Torque (M²)= 4110...
€5,192.72 *

Remaining stock of gear motors

Occasionally we have favorable special items of gear motors, frequency inverters and electric motors on offer. These are usually new goods with possibly slight paint damage or similar minor signs of use. Often our customers discover during commissioning that they have chosen the wrong drive after all. In this case, a quick exchange is of course possible. The motor then has slight signs of use, but is still in the best condition. After a positive technical inspection, the product is offered again in our online store with a price reduction. These engines are in great demand, as they are sold at a much lower price than comparable products.

Quality products

Our three-phase a. gearmotors are subject to strict quality controls. Precise tests are carried out both during production and before shipment to ensure proper functioning during commissioning. This double check minimizes error rates and avoids replacement costs.

Special customer requirements

Special motors and customer-specific motors are available from our factory production for a small additional charge and with an acceptable delivery time. In addition, we can realize your urgent requirements at short notice and at fair prices by modifying stock motors in our plant in Ahlhorn. Stock motors are modified in our workshop with engineering department and paint shop. Possible are e.g. alternative voltages and/or frequencies, a second shaft end, special bearings, motors with forced ventilation, motors with mounted brake or motors with speed sensors.

Geared motors - variants

Whether special helical, worm, flat, bevel or planetary geared motors with special motor designs such as frequency converters or in various protection classes, we are your professional partner in the field of standard and special motors. Our drives comply with the regulations according to DIN or IEC. If you can not find your motor here in the online store, we ask for your request by email or simply contact us directly by phone.

 

Viewed