Frequency inverter ED230-0025-alpha
Frequency Inverter, 1x 230V, EASYdrive alpha 0.25 kW
Frequency inverterPower= 0.25 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 1.4 A, Mains current (input)= 4.5 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable.
All product photos are non-binding examples! Technical changes reserved.
From
€326.39*
Frequency inverter ED230-0037
Frequency Inverter, 1x 230V, EASYdrive 0.37 kW
Frequency inverterPower= 0.37 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 2.3 A, Mains current (input)= 4.5 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€517.65*
Frequency inverter ED230-0037-alpha
Frequency Inverter, 1x 230V, EASYdrive alpha 0.37 kW
Frequency inverterPower= 0.37 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 2.2 A, Mains current (input)= 4.5 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable.
All product photos are non-binding examples! Technical changes reserved.
From
€347.99*
Frequency inverter ED230-0055
Frequency Inverter, 1x 230V, EASYdrive 0.55 kW
Frequency inverterPower= 0.55 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 3.2 A, Mains current (input)= 5.6 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€539.52*
Frequency inverter ED230-0055-alpha
Frequency Inverter, 1x 230V, EASYdrive alpha 0.55 kW
Frequency inverterPower= 0.55 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 2.7 A, Mains current (input)= 5.8 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable.
All product photos are non-binding examples! Technical changes reserved.
From
€369.58*
Frequency inverter ED230-0075
Frequency Inverter, 1x 230V, EASYdrive alpha 0.75 kW
Frequency inverterPower= 0.75 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 3.9 A, Mains current (input)= 6.9 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€569.19*
Frequency inverter ED230-0075-alpha
Frequency Inverter, 1x 230V, EASYdrive alpha 0.75 kW
Frequency inverterPower= 0.75 kW, Size= alpha, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 187mm x 126mm x 70mm,Rated current output, eff. [IN at 8 kHz]= 3.3 A, Mains current (input)= 7.3 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency inverter, it should be noted that there are 2 variants. Firstly, this includes the devicein standard version and secondly the device with a membrane keyboard. There is a potentiometer in both versionsoptional to order.The one shown “ Frequency inverter in standard version” is fully usable.but requires a corresponding control panel to control it. One of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI control unit" needed no optional control panel,There is also a display in the device lid. The options mentioned are if required usable.
All product photos are non-binding examples! Technical changes reserved.
From
€391.15*
Frequency inverter ED230-0110
Frequency Inverter, 1x 230V, EASYdrive alpha 1.1 kW
Frequency inverterPower= 1.1 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 5.2 A, Mains current (input)= 9.2 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€601.56*
Frequency inverter ED400-0055
Frequency Inverter, 3x 400V, EASYdrive 0.55 kW
Frequency inverterPower= 0.55 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 1.7 A, Mains current (input)= 1.4 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€558.40*
Frequency inverter ED400-0075
Frequency Inverter, 3x 400V, EASYdrive 0.75 kW
Frequency inverterPower= 0.75 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 2.3 A, Mains current (input)= 1.9 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€590.76*
Frequency inverter ED400-0110
Frequency Inverter, 3x 400V, EASYdrive 1.1 kW
Frequency inverterPower= 1.1 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 3.1 A, Mains current (input)= 2.6 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€623.13*
Frequency inverter ED400-0150
Frequency Inverter, 3x 400V, EASYdrive 1.5 kW
Frequency inverterPower= 1.5 kW, Size= A, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,Rated current output, eff. [IN at 8 kHz]= 4.0 A, Mains current (input)= 3.3 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€655.51*
Frequency inverter ED400-0220
Frequency Inverter, 3x 400V, EASYdrive 2.2 kW
Frequency inverterPower= 2.2 kW, Size= B, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 270mm x 189mm x 140mm,Rated current output, eff. [IN at 8 kHz]= 5.6 A, Mains current (input)= 4.6 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€809.30*
Frequency inverter ED400-0300
Frequency Inverter, 3x 400V, EASYdrive 3.0 kW
Frequency inverterPower= 3.0 kW, Size= B, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 270mm x 189mm x 140mm,Rated current output, eff. [IN at 8 kHz]= 7.5 A, Mains current (input)= 6.2 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€936.08*
Frequency inverter ED400-0400
Frequency Inverter, 3x 400V, EASYdrive 4.0 kW
Frequency inverterPower= 4.0 kW, Size= B, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 270mm x 189mm x 140mm,Rated current output, eff. [IN at 8 kHz]= 9.5 A, Mains current (input)= 7.9 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€1,068.26*
Frequency inverter ED400-0550
Frequency Inverter, 3x 400V, EASYdrive 5.5 kW
Frequency inverterPower= 5.5 kW, Size= C, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 307mm x 223mm x 181mm,Rated current output, eff. [IN at 8 kHz]= 13.0 A, Mains current (input)= 10.8 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€1,265.20*
Frequency inverter ED400-0750
Frequency Inverter, 3x 400V, EASYdrive 7.5 kW
Frequency inverterPower= 7.5 kW, Size= C, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 307mm x 223mm x 181mm,Rated current output, eff. [IN at 8 kHz]= 17,8 A, Mains current (input)= 14.8 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€1,456.73*
Frequency inverter ED400-1100
Frequency Inverter, 3x 400V, EASYdrive 11.0 kW
Frequency inverterPower= 11.0 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 28.0 A, Mains current (input)= 23.2 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€1,961.16*
Frequency inverter ED400-1500
Frequency Inverter, 3x 400V, EASYdrive 15.0 kW
Frequency inverterPower= 15.0 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 34.0 A, Mains current (input)= 28.2 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€2,176.76*
Frequency inverter ED400-1850
Frequency Inverter, 3x 400V, EASYdrive 18.5 kW
Frequency inverterPower= 18.5 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 40.0 A, Mains current (input)= 33.2 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€2,395.48*
Frequency inverter ED400-2200
Frequency Inverter, 3x 400V, EASYdrive 22.0 kW
Frequency inverterPower= 22.0 kW, Size= D, Input voltage= 3 x 400V +10%, Input frequency= 50/60 Hz,Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP55, Dimensions= 414mm x 294mm x 232mm,Rated current output, eff. [IN at 8 kHz]= 48.0 A, Mains current (input)= 39.8 A,
Product InformationThe Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments. The required optional control variant must be specified when ordering. The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measuresthe EMC class C2 (with 1-phase mains supply).
! Possible variant selection!
Product selectionWhen selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered:- External control device (MMI with cable and plug)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,such as start-stop, left-right running, etc. One of the following options must also be ordered for parameterization:- External control device (MMI with cable and connector)- Interface cable for PC programming - Bluetooth adapter
The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,in addition, a display is included in the device cover. The mentioned options can be used if required.
All product photos are non-binding examples! Technical changes reserved.
From
€2,611.29*
Frequency inverters mounted on electric motors
JS-Technik GmbH specializes in extensive challenges in the field of professional drive technology. The focus is on three-phase motors, frequency inverters and geared motors. On this page you will find frequency inverters with a power of 0.37kW, 0.55kW, 0.75kW, 1.1kW, 1.5kW, 2.2kW, 3.0kW, 4kW, 5.5kW, 7.5kW, 11kW, 15kW, 18.5kW and 22kW. The high-quality frequency inverters can be mounted on all common electric motors using a variety of adapter plates. Since there is not always enough space available, the frequency inverter is also suitable for wall mounting.
Infinitely variable frequency inverters/electric motors
Our continuously variable electric motors with built-in frequency inverters are characterized by extensive parameters. There are a few special features worth mentioning:
Intuitive operating and programming concept, handheld control unit with plain text display available as an accessory, integrated soft PLC according to EN 61131-3, PC software with integrated oscilloscope function, optional fieldbus systems (CANopen, EtherCAT, Profibus), flexible use with all common types of motors, asynchronous motors, synchronous motors, EC motors, easy installation, motor-integrated or motor-near installation, can be used indoors/outdoors, current vector-oriented control, fan operation with power-saving function, stall detection, PID controller with integrated stand-by function, wide input voltage range, fly-catcher, easy to service, robust and compact die-cast housing Protection class IP65, very high temperature and vibration resistance, state-of-the-art circuit topology, no integrated fans (up to 7.5 kW), S1 operation at 50 °C and 8 kHz clock speed.
Worm gearbox with frequency inverter motor
Special advantages of the EASYdrive frequency inverter
Robust aluminium housing:
Avoid costly failures and control your speeds with low maintenance and reliability thanks to the stable design - even in mobile applications and in the heavy-duty sector.
Low maintenance and long-lasting:
The fanless design up to 7.5kW and the intelligent DC link concept with film capacitors reduce the susceptibility to errors and ensure a long service life.
Various application circuit boards:
Take advantage of the variety and adapt the EASYdrive to your needs - with additional safety functions and fieldbus interfaces.
Adapter plates for all engine types:
The innovative adaptation concept with an extensive range of standard and engine-specific adapter plates enables use with almost any engine on the market.
INVERTER app:
Commissioning - parameterization - monitoring, you can now do all of this easily and wirelessly via Bluetooth connection from your cell phone or tablet.
Special motors with frequency inverters
In many cases, the continuously variable frequency inverters with motors are also required as special versions with customer-specific requirements and large quantities. We are the ideal partner for you here, because our specialist staff in combination with an extensive converter and electric motor warehouse and our own final assembly mean we can cover a wide range.
SEO= frequency inverter mounted on electric motors