CMRV030-56 DC100-2 - 0.14 kW - 60 rpm- Worm Gearbox Motor

€378.81*

Product number:
C030000066000500A205OM
Product information "CMRV030-56 DC100-2 - 0.14 kW - 60 rpm- Worm Gearbox Motor"

Worm gear with DC motor, Power= 0.14 kW (S2 operation), Speed= 60 rpm

Voltage= 12 or 24 volts DC, Degree of protection= gearbox IP55, motor IP40, Current consumption= 12V/16.8A, 24V/8.4A,

Operating mode= S2 (short-time operation), Hollow shaft= 14mm, Motor Speed= 2 pole, Translation (i)= 40,

Torque= 14.0 Nm, Service factor (f.s.)= 1.0, Connection= lead-out cable (1m), Weight= 3.7 kg,

An external speed control is available as an option. The gearbox can be operated in both directions of rotation

and includes an oil fill upon delivery. In accordance with VDE 0105 and IEC 364, all work on the

Electrical drive to be carried out only by qualified specialist personnel.



All product photos are non-binding examples! Technical changes reserved.

Performance: 0,14 kW
Rotation speed: 51 to 100 rpm
Series: CMRV-series
Shaft diameter: 14 mm
Torque: 11 to 25 Nm
Type of construction: Standard worm gear

Zubehör

CMRV 030-output shaft
Output shaft with feather key for worm gear CMRV 030, 14 x 30mm All product photos are non-binding examples! Technical changes reserved.

€23.06*
CMRV 030-double output shaft
Double output shaft with feather key for worm gear CMRV 030, 14 x 30mm, both sides All product photos are non-binding examples! Technical changes reserved.

€25.80*
CMRV 030 FA output flange
Output flange for CMRV 030 Ø 68 x 50 x 80 mm. B5 All product photos are non-binding examples! Technical changes reserved.

€20.92*
CMRV 030 torque arm
Torque arm for CMRV 030 All product photos are non-binding examples! Technical changes reserved.

€23.06*
CMRV 030-hollow shaft cover cap
Hollow shaft cover cap for CMRV 030, plastic, black, All product photos are non-binding examples! Technical changes reserved.

€15.32*
DC motor control 20 A without switch box
Speed control for DC motors The PLN20 speed control is suitable for DC motors up to 500 W / 20 A .Extensive control variants of the DC motor are possible. These arein the catalog included in the download. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:146mm x 177mm x 34mm Danger:Individual electrical protection must be carried out on site by qualified personnel! All product photos are non-binding examples! Technical changes reserved.

€420.31*
DC motor control 40 A without switch box
Speed control for DC motors The PLN40 speed control is suitable for DC motors up to 800 W / 40 A.Extensive control variants of the DC motor are possible. These arein the catalog included in the download. Dimensions:146 mm x 177 mm x 34 mm DC motor switch-on and switch-off times:- Acceleration time: 0.5 - 10 seconds- Delay time: 0.5 - 10 seconds   All product photos are non-binding examples! Technical changes reserved.

€493.14*
DC motor control 20 A with switch box
Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5-10 kΩ), left-off-right switchand motor control mounted in the control box. The speed control is for DC motorsSuitable for up to 500 W / 20 A. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350mm x 250mm x 155mmDanger:Individual electrical protection must be carried out on site by qualified personnel!   All product photos are non-binding examples! Technical changes reserved.

€907.86*
DC motor control 40 A with switch box
Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5-10 kΩ), left-off-right switchand motor control mounted in the control box. The speed control is for DC motorsSuitable for up to 800 W / 40 A. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350mm x 250mm x 155mmDanger:Individual electrical protection must be carried out on site by qualified personnel!   All product photos are non-binding examples! Technical changes reserved.

€1,067.43*