Frequency inverter ED230-0055

From €539.52*

Prices incl. VAT plus shipping costs

Delivery time on demand

Model

Product number:

ED230-3.2-GH01DKM

Shipping fees:

Article + Packaging

Notice:

An adapter plate is required for installation! (in accessories)

Downloads

Product information " Frequency inverter ED230-0055"

Frequency Inverter, 1x 230V, EASYdrive 0.55 kW

Frequency inverter
Power= 0.55 kW, Size= A, Input voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,
Output frequency= 0- 400 Hz, EMC filter= C2, Protection class= IP65, Dimensions= 233mm x 153mm x 120mm,
Rated current output, eff. [IN at 8 kHz]= 3.2 A, Mains current (input)= 5.6 A,

Product Information
The Frequency inverter optionally offers the possibility to become “bus capable” with the help of fieldbus modules.
With Modbus (already included) and CANopen, the EASYdrive offers alpha compatibility with control environments.
The required optional control variant must be specified when ordering.
The EASYdrive alpha drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measures
the EMC class C2 (with 1-phase mains supply).

! Possible variant selection!

Product selection
When selecting the frequency converter, make sure that there are 3 variants. First, this includes the device
in the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI
operating unit.

The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,
but needs to control a corresponding control panel.
For this purpose, one of the following options must be ordered:
- External control device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with membrane keyboard” offers the possibility of controlling the FU directly,
such as start-stop, left-right running, etc.
One of the following options must also be ordered for parameterization:
- External control device (MMI with cable and connector)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with MMI operating unit" does not require an optional operating unit,
in addition, a display is included in the device cover. The mentioned options can be used if required.

All product photos are non-binding examples! Technical changes reserved.

Properties " Frequency inverter ED230-0055"

Performance:	0,55 kW
Protection class:	IP65
Series:	EASYdrive ED230 0,37kW - 1,5kW
Tension:	1 x 230 V

Accesories

EASYdrive-Bluetooth-Adapter

Bluetooth adapter for EASYdrive The EASYdrive offers a Bluetooth interface that integrates as a plug-in variant via the M12 can be. -only additional price, cannot be ordered individually- (image only product example) All product photos are non-binding examples! Technical changes reserved.

€154.90*

Details

EASYdrive- MMI handheld controller

MMI handheld control unit, incl. spiral cable 0.5m, with M12 screw-on coupling The following functions are possible with the EASYdrive MMI: • Parameterization of the device setting • Control (e.g. lock and unlock) • Display of various process variables • Storage of parameter sets (max. 8) • Transfer parameter sets to other INVEOR (product example only)

€175.45*

Details

EASYdrive Touch operating terminal

Touch operator terminal for EASYdrive frequency converter The 7" touch operator terminal in dark gray is specially designed foroperating and monitoring tasks in all areasof industrial automation. The fanlesssystem with 32-bit Cortex A8 processor and 600 MHzclock has plenty of computing power and impresses withpleasantly fast page switching. The "EasyBuilder Pro" configuration software does not place any specialrequirements on your PC, is easy to use andis available free of charge. Écran graphique LCD TFT 7" 800 x 480 pixels Rétroéclairage LED Boîtier en plastique robuste Système de refroidissement sans ventilateur Horloge en temps réel RTC IP65 à l'avant, conforme NEMA4 Ethernet 10/100 BaseTX RS485 Hôte USB

€529.66*

Details

EASYdrive parameterization cable

Parameterization cable USB PC USB cable with interface converter PC software available for free download All product photos are non-binding examples! Technical changes reserved.

€154.90*

Details

EASYdrive extension parameterization cable 5m

Extension cable 5m, for EASYdrive parameterization cable only for use with item ED-PC-PARA Can be used as an extension -> PC connection Can be used as an extension -> MMI connection Expandable up to 50m

€47.92*

Details

EASYdrive-breaking resistor BG A

Brake chopper with braking resistor size A for EASYdrive. 100 W, 100 ohms; IP65, connecting cable 510mm, L = 110mm W = 80mm H = 15mm. -only additional price, cannot be ordered individually- All product photos are non-binding examples!

€100.01*

Details

EASYdrive CANopen

CANopen interface card for EASYdrive. The CANopen bus system belongs to the fieldbus family and is based on the CAN bus (Controller Area Network). As a rule, the network is built up in a linear structure. The maximum data transfer rate on a CANopen bus can be up to 1 Mbit / s and depends on the cable length. A maximum of 127 participants may exist in the bus association. Including M12 connection cable open 2 m, M12 connector / open / CANopen / 5-pin / 2 m / A-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€50.75*

Details

EASYdrive Sercos III

Sercos III interface card for EASYdrive. The Sercos III bus system belongs to the fieldbus family. Usually the network built in a linear structure. The maximum data transfer rate on a Sercos III bus can be up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

EASYdrive EtherCAT

EtherCAT interface card for EASYdrive. The EtherCAT bus system belongs to the fieldbus family. Usually the network is in linear structure. The maximum data transfer rate on an EtherCAT bus can up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

EASYdrive PROFINET

PROFINET interface card for EASYdrive The PROFINET bus system belongs to the fieldbus family. As a rule, the network is built up in a linear structure. The maximum data transfer rate on a PROFINET bus can be up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. Please note that the incoming bus line is connected to the "In" socket and the outgoing line to the "Out" socket . If it is the last participant, the "Out" socket must be left blank - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

EASYdrive Profibus

Profibus interface card for EASYdrive. Communication interface. With the help of PROFIBUS, devices from different providers can be customized communicate. PROFIBUS independently distinguishes between master and slave devices, so that multi-master operation is also possible. Including M12 connection cable open 2 m, M12 connector / open / Profibus / 5-pin / 2 m / B-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*

Details

Adapter plate EASYdrive size A

Adapter plate EASYdrive size A Adapter plate for motor mounting for size A, with integrated motor terminal board and PTC connection, unprocessed version, short bridge. All product photos are non-binding examples! Technical changes reserved.

€60.14*

Details

Adapter plate EASYdrive size A wall

Adapter plate EASYdrive size A Adapter plate for wall mounting for size A, with integrated motor terminal board and PTC connection, unprocessed version, short bridge. All product photos are non-binding examples! Technical changes reserved.

€78.23*

Details

Foot switch with metal housing F1-AU0-10V

Rated operational Voltage Ue 12-26 V DC Utilization category DC-13 Ue / Ie 12-26 DC / 0.2 A according to IEC / EN 60947-5-2 Voltage output (control range) 0- 10 V DC short-circuit protection device switching element permanent short-circuit u. overload-proof, clocking Protection class IIIM UB GND RL U-OUT U-OUT housing AL die-cast; Lid die-cast aluminum actuating elements foot pedal (PA) ambient temperature -30 ° C to +80 ° C contact type PNP closer, teachbar from 0.1 - 5.9 mm switching force pedal approx. 10 N (center of pedal) Mechanical life 10 x 106 switching cycles and switching frequency max. 50 / min; Fastening 2 M8 screws connection type screw connections (M3.5) number of connections 4, conductor cross sections solid 0.5 - 1.5 mm2 stranded wire with ferrule 0.5 - 1.5 mm2, cable entry 1 x M20 x 1.5 weight 1.5 kg, Protection class IP65 according to IEC / EN 60529 drawing ID: Z030

€237.38*

Details