KV002-DC250-2-0.35 kW-270 rpm bevel gear motor

€836.72*

Prices incl. VAT plus shipping costs

Delivery time approx. 36 working days

Mounting position for gearmotors

Tension

Product number:

KV002167000111A206OM

Downloads

Product information "KV002-DC250-2-0.35 kW-270 rpm bevel gear motor"

Bevel geared motor with DC motor, Power=0.35 kW (S2 operation), Speed=270 rpm,

Voltage=12 or 24 volts DC, Protection class=gear IP55, motor IP66, Current consumption=12V/38.5 A, 24V/20.5 A,

Operating mode=S2 (short-term operation), Hollow shaft=20 mm, Motor speed=2 poles, Ratio (i)=11.09,

Torque=13 Nm, Service factor (fs)=4.0, Connection=clamping bolt, Weight=15.0 kg.

An external speed control is optionally available. The gearbox can be operated in both directions of rotation

and contains an oil filling upon delivery. According to VDE 0105 or IEC 364, all work on electric drive can only

be carried out by qualified specialist personnel.

All product photos are non-binding examples! Technical changes reserved.

When ordering, please select the desired installation position and version!

Properties "KV002-DC250-2-0.35 kW-270 rpm bevel gear motor"

Performance:	0,35 kW
Rotation speed:	201 to 300 rpm
Series:	K-series
Torque:	11 to 25 Nm

Accesories

KV 00X double output shaft

Double output shaft with key father for helical gear reducer KV002 and KV003. 20 x 40 mm The shaft is permanently installed and can only be ordered with geared motor All product photos are non-binding examples!

€39.71*

Details

KV 00X double output shaft for flange

Double output shaft with key for bevel gearboxes KV002 and KV003. 20x40mm The shaft is permanently installed and can only be ordered with a geared motor + flange. All product photos are non-binding examples! Technical changes reserved.

€40.39*

Details

KV 00X output flange

Output flange for helical gear reducer KV002 and KV003. All product photos are non-binding examples! Technical changes reserved.

€36.51*

Details

KV 00X output shaft, flange

Output shaft with key father for helical gear reducer KV002 and KV003. 20 x 40 mm The shaft is permanently installed and can only be ordered with geared motor + flange.. Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€35.55*

Details

KV 00X torque arm

Torque arm for helical gear reducer KV002 and KV003. All product photos are non-binding examples! Technical changes reserved.

€40.39*

Details

KV 00X output shaft

Output shaft with key father for helical gear reducer KV002 and KV003. 20 x 40 mm The shaft is permanently installed and can only be ordered with geared motor Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€31.67*

Details

DC motor control 40 A without switch box

Speed control for DC motors The PLN40 speed control is suitable for DC motors up to 800 W / 40 A.Extensive control variants of the DC motor are possible. These arein the catalog included in the download. Dimensions:146 mm x 177 mm x 34 mm DC motor switch-on and switch-off times:- Acceleration time: 0.5 - 10 seconds- Delay time: 0.5 - 10 seconds All product photos are non-binding examples! Technical changes reserved.

€493.14*

Details

DC motor control 20 A without switch box

Speed control for DC motors The PLN20 speed control is suitable for DC motors up to 500 W / 20 A .Extensive control variants of the DC motor are possible. These arein the catalog included in the download. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:146mm x 177mm x 34mm Danger:Individual electrical protection must be carried out on site by qualified personnel! All product photos are non-binding examples! Technical changes reserved.

€420.31*

Details

DC-Motorsteuerung-Drehzahlregler-Gleichstrommotoren-Schaltkasten

DC motor control 40 A with switch box

Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5-10 kΩ), left-off-right switchand motor control mounted in the control box. The speed control is for DC motorsSuitable for up to 800 W / 40 A. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350mm x 250mm x 155mmDanger:Individual electrical protection must be carried out on site by qualified personnel! All product photos are non-binding examples! Technical changes reserved.

€1,067.43*

Details

DC motor control 20 A with switch box

Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5-10 kΩ), left-off-right switchand motor control mounted in the control box. The speed control is for DC motorsSuitable for up to 500 W / 20 A. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350mm x 250mm x 155mmDanger:Individual electrical protection must be carried out on site by qualified personnel! All product photos are non-binding examples! Technical changes reserved.

€907.86*

Details