MV103-63 DC250-2 – 0,50kW – 102 rpm spur gear motor

From €968.81*

Prices incl. VAT plus shipping costs

Delivery time on demand

Mounting position for gearmotors

Tension

Type of construction

Product number:

A0103168000294A206OM

Downloads

Product information "MV103-63 DC250-2 – 0,50kW – 102 rpm spur gear motor"

Spur gear motor with DC Motor, power= 0.50 kW (S2 operation), Speed= 102 rpm

Voltage= 12 or 24 volts DC, Degree of protection= Gearbox IP55, Motor IP40, Current consumption= 12V/58.8A, 24V/29.4A,

Operating mode= S2 (short-time operation), Shaft= 25mm x 50mm, Motor speed= 2 pole, Translation (i)= 29.40,

Torque= 46.0Nm, Service factor (fs)= 3.0, Connection= clamping bolt, Weight= 19.7kg

An external speed control is available as an option. The gearbox can be operated in both directions of rotation

and includes an oil fill upon delivery. In accordance with VDE 0105 and IEC 364, all work on the

Electrical drive to be carried out only by qualified specialist personnel.

All product photos are non-binding examples! Technical changes reserved.

When ordering, please select the desired installation position and design!

Properties "MV103-63 DC250-2 – 0,50kW – 102 rpm spur gear motor"

Performance:	0,50 kW
Rotation speed:	101 to 200 rpm
Torque:	26 to 50 Nm

Zubehör

DC motor control 20 A without switch box

Speed control for DC motors The PLN20 speed control is suitable for DC motors up to 500 W / 20 A .Extensive control variants of the DC motor are possible. These arein the catalog included in the download. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:146mm x 177mm x 34mm Danger:Individual electrical protection must be carried out on site by qualified personnel! All product photos are non-binding examples! Technical changes reserved.

€420.31*

Details

DC motor control 40 A without switch box

Speed control for DC motors The PLN40 speed control is suitable for DC motors up to 800 W / 40 A.Extensive control variants of the DC motor are possible. These arein the catalog included in the download. Dimensions:146 mm x 177 mm x 34 mm DC motor switch-on and switch-off times:- Acceleration time: 0.5 - 10 seconds- Delay time: 0.5 - 10 seconds All product photos are non-binding examples! Technical changes reserved.

€493.14*

Details

DC-Motorsteuerung-Drehzahlregler-Gleichstrommotoren-Schaltkasten

DC motor control 20 A with switch box

Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5-10 kΩ), left-off-right switchand motor control mounted in the control box. The speed control is for DC motorsSuitable for up to 500 W / 20 A. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350mm x 250mm x 155mmDanger:Individual electrical protection must be carried out on site by qualified personnel! All product photos are non-binding examples! Technical changes reserved.

€907.86*

Details

DC motor control 40 A with switch box

Speed control for DC motors in the control box Pre-wired DC motor control unit with potentiometer (5-10 kΩ), left-off-right switchand motor control mounted in the control box. The speed control is for DC motorsSuitable for up to 800 W / 40 A. Motor on and off times:- Acceleration ramp: 0.5 - 10 sec- Deceleration ramp: 0.5 - 10 sec Particularities:Room temperature: 0°C / +40°C (alarm below zero) Dimensions:350mm x 250mm x 155mmDanger:Individual electrical protection must be carried out on site by qualified personnel! All product photos are non-binding examples! Technical changes reserved.

€1,067.43*

Details