Helical geared motor with possibility of flange mounting from B3 to B35, Power= 1,1 kW, Speed= 19 upm, Ratio (i)= 73,35, Torque (M²)= 518 Nm, Service factor (fs)= 0,9,Type = B3 (B35 for an extra charge), Shaft= 35x70 mm, Weight= 41,7 kg, Paint= RAL5010, Temperature sensor = 3 x PTC thermistors. When ordering, please select the desired mounting position and design! Frequency InverterPower= 1.1 kW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,Mains current (input)= 9.2 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for coolingneeded. Produktinformatioinen The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and integrate the EASYdrive ideally in the control environment of its application.The required optional control variant must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 (for 3-phase mains supply), or C1 (for 1-phase mains supply).                                         ! Possible variant selection!                 Product selection When selecting the frequency converter, make sure that there are 3 variants. First, this includes the devicein the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI operating unit.The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,but needs to control a corresponding control panel.For this purpose, one of the following options must be ordered: - External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,such as Start-stop, left-right-run etc.For parameterization, one of the following options must also be ordered:- External HMI device (MMI with cable and plug)- Interface cable for PC programming- Bluetooth adapter The variant "Frequency converter with MMI operating unit" does not require an optional operating unitIn addition, a display is included in the device cover. The mentioned options can be used if required. ProgrammingThe three-phase motor with integrated EASYdrive frequency converter is supplied with some basic functions reprogrammed. If further parameterization is necessary, we offer these adjustmentsat an hourly rate of 86, - € / net. Important instructionsThis drive is a custom-made product. A resignation or revocation of the purchase is excluded!All product photos are non-binding examples!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz. Power= 0.55 kW, Speed= 75 rpm, Ratio (i)= 18.2, Torque (M²)= 64 Nm, Service factor (fs)= 1.3. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 20.5kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 122 rpm, Ratio (i)= 11.14, Torque (M²)= 9 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 138 rpm, Ratio (i)= 9.87, Torque (M²)= 8 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 156 rpm, Ratio (i)= 8.7, Torque (M²)= 7 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 161 rpm, Ratio (i)= 8.45, Torque (M²)= 6 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 173 rpm, Ratio (i)= 7.84, Torque (M²)= 6 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 183 rpm, Ratio (i)= 7.45, Torque (M²)= 6 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 197 rpm, Ratio (i)= 6.91, Torque (M²)= 5 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 227 rpm, Ratio (i)= 6, Torque (M²)= 5 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 244 rpm, Ratio (i)= 5.57, Torque (M²)= 4 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 298 rpm, Ratio (i)= 4.56, Torque (M²)= 3 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 349 rpm, Ratio (i)= 3.9, Torque (M²)= 3 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.12 kW, Speed= 376 rpm, Ratio (i)= 3.62, Torque (M²)= 3 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 14.7kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 392 rpm, Ratio (i)= 6.91, Torque (M²)= 4 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 452 rpm, Ratio (i)= 6.0, Torque (M²)= 3 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 487 rpm, Ratio (i)= 5.57, Torque (M²)= 3 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.0kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 594 rpm, Ratio (i)= 4.56, Torque (M²)= 3 Nm, Service factor (fs)= 4.0. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 695 rpm, Ratio (i)= 3.90, Torque (M²)= 2 Nm, Service factor (fs)= 4.0. Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.0kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 749 rpm, Ratio (i)= 3.62, Torque (M²)= 2 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 121 rpm, Ratio (i)= 11.14, Torque (M²)= 13 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 137 rpm, Ratio (i)= 9.87, Torque (M²)= 11 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 155 rpm, Ratio (i)= 8.7, Torque (M²)= 10 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!

Helical geared motor (gearbox with IEC flange to the ac-motor), Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530). Frequency= 50/ 60 Hertz.Power= 0.18 kW, Speed= 160 rpm, Ratio (i)= 8.45, Torque (M²)= 10 Nm, Service factor (fs)= 4.0 Type = B3 (B5 for an extra charge), Shaft = 20mm x 40mm, Weight= 15.3kg, Paint= RAL5010. Temperature sensor = 3 x PTC thermistors, Operating mode= S1- (100 % cdf), Terminal box= top (rotatable). The helical gear is suitable for frequency converter operation and corresponds to the IEC 60034-30: 2008. The gear motor can be operated in both directions and contains an oil filling on delivery. According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples! When ordering, please select the desired mounting position and design!