Go to homepage
€0.00*

CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230

CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230
CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230

From €892.35*

Prices incl. VAT plus shipping costs

Product number:
C040000205100200K101TM
Shipping fees:
Article + Packaging
Notice:
Shipping on pallet
Return excluded!
Product information "CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230"

Worm Gear Motor, Power= 0,37 KW, Speed= 7 to 84 rpm,

Degree of protection= IP55, Insulation class= F (155°C), Operating mode= S1, Type of duty= S1- 100%,
Hollow shaft= 18mm, Engine Speed= 4 pole, Ratio (i)= 20, Torque= 39 Nm,
Service factor (f.s.)= 1 . Terminal box= top (rotatable), Weight= 8,3 kg , Paint= RAL 5010 (gentian blue),
Temperature sensor= 3 x PTC-thermistors, Housing= Aluminum or cast iron, Ball bearings= SKF, C & U or equivalent.


Frequency Inverter
Power= 0.37 KW, Size= A, Input Voltage= 1 x 230V +10% (single phase), Input frequency= 50/60 Hz,
Output frequency= 0-400 Hz, EMC filter= C1, Degree of protection= IP65, Dimensions= 233mm x 153mm x 120mm,
Mains current (input)= 4.5 A. Ideal control range= 5-60 Hz, below 30 Hz, a forced cooling fan is used for cooling
needed.

Product Information 
The frequency converter optionally offers the possibility of becoming "bus-capable" with the aid of fieldbus modules. 
With CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos the EASYdrive offers 
Compatibility with almost all common interfaces. The customer can choose the relevant bus system for him and 
integrate the EASYdrive ideally in the control environment of its application.The required optional control variant 
must be specified for orders.The EASYdrive lasts without external filter measures the EMC class C2 
(for 3-phase mains supply), or C1 (for 1-phase mains supply).

  ! Possible variant selection!

             Electric- Motor + Frequency-Inverter

Product selection

When selecting the frequency converter, make sure that there are 3 variants. First, this includes the device
in the standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI 
operating unit.
The illustrated "frequency converter in standard version" is fully usable and contains a built-in potentiometer,
but needs to control a corresponding control panel.
For this purpose, one of the following options must be ordered:

- External HMI device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with membrane keypad" offers the possibility to directly control the FI,
such as Start-stop, left-right-run etc.
For parameterization, one of the following options must also be ordered::

- External HMI device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency converter with MMI operating unit" does not require an optional operating unit
In addition, a display is included in the device cover. The mentioned options can be used if required.

   

Important notes
This drive is a custom-made product. A withdrawal or cancellation of the purchase is excluded!
All product photos are non-binding examples!

Properties "CMRV040 712-4 - 0.37 KW - 7 to 84 rpm- Worm Gearbox Inverter-motor ED230"
Control range: here. 7 bis 84 rpm
Performance: 0,37 kW
Series: EASYdrive ED230 0,37kW - 1,5kW
Tension: 1 x 230 V
Torque: 26 to 50 Nm

Accesories

EASYdrive-Bluetooth-Adapter
EASYdrive-Bluetooth-Adapter
Bluetooth adapter for EASYdrive The EASYdrive offers a Bluetooth interface that integrates as a plug-in variant via the M12 can be. -only additional price, cannot be ordered individually- (image only product example) All product photos are non-binding examples! Technical changes reserved.

€154.90*
Details
CMRV 040 FA output flange
CMRV 040 FA output flange
Output flange for CMRV 040 Ø 110 x 60 x 75 mm. B5 All product photos are non-binding examples! Technical changes reserved.

€21.81*
Details
CMRV 040-output shaft
CMRV 040-output shaft
Output shaft with feather key for worm gear CMRV 040, 18 x 40mm All product photos are non-binding examples! Technical changes reserved.

€23.98*
Details
Drehmomentstütze
CMRV 040 torque arm
Torque arm for CMRV 040 All product photos are non-binding examples! Technical changes reserved.

€23.98*
Details
EASYdrive parameterization cable
EASYdrive parameterization cable
Parameterization cable USB PC USB cable with interface converter PC software available for free download All product photos are non-binding examples! Technical changes reserved.

€154.90*
Details
ED230 foil keypad
ED230 foil keypad
The potentiometer integrated on the side enables a comfortable setpoint specification. The interface for the connection is available as standard. The potentiometer is available as an accessory. -The potentiometer is part of the converter and cannot be retrofitted.- All product photos are non-binding examples!

€20.55*
Details
EASYdrive-breaking resistor BG A
EASYdrive-breaking resistor BG A
Brake chopper with braking resistor size A for EASYdrive. 100 W, 100 ohms; IP65, connecting cable 510mm, L = 110mm W = 80mm H = 15mm. -only additional price, cannot be ordered individually- All product photos are non-binding examples!

€100.01*
Details
Right/left switch, emergency stop for FU
Right/left switch, emergency stop for FU
Right-left rotation switch with emergency stop in a plastic housing Switch not latching. External Frequency inverter Steering. Optionally with 1m, 3m or 5m cable (wired). Please select version. All product photos are non-binding examples!

From €171.65*
Details
EASYdrive EtherCAT
EASYdrive EtherCAT
EtherCAT interface card for EASYdrive. The EtherCAT bus system belongs to the fieldbus family. Usually the network is in linear structure. The maximum data transfer rate on an EtherCAT bus can up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*
Details
EASYdrive Sercos III
EASYdrive Sercos III
Sercos III interface card for EASYdrive. The Sercos III bus system belongs to the fieldbus family. Usually the network built in a linear structure. The maximum data transfer rate on a Sercos III bus can be up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. It should be noted that the incoming bus line to the "In" socket and the outgoing line to the "Out" socket can be connected. If it is the last participant, the "Out" socket is free to leave - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded.   -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*
Details
EASYdrive Profibus
EASYdrive Profibus
Profibus interface card for EASYdrive. Communication interface. With the help of PROFIBUS, devices from different providers can be customized communicate. PROFIBUS independently distinguishes between master and slave devices, so that multi-master operation is also possible. Including M12 connection cable open 2 m, M12 connector / open / Profibus / 5-pin / 2 m / B-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*
Details
Getriebemotoren Abdeckkappe
CMRV 040-hollow shaft cover cap
Hollow shaft cover cap for CMRV 040, plastic, black, All product photos are non-binding examples! Technical changes reserved.

€15.32*
Details
Doppelausgangswelle
CMRV 040-double output shaft
Double output shaft with feather key for worm gear CMRV 040, 18 x 40mm, both sides All product photos are non-binding examples! Technical changes reserved.

€28.07*
Details
EASYdrive- MMI handheld controller
EASYdrive- MMI handheld controller
MMI handheld control unit, incl. spiral cable 0.5m, with M12 screw-on coupling The following functions are possible with the EASYdrive MMI: • Parameterization of the device setting • Control (e.g. lock and unlock) • Display of various process variables • Storage of parameter sets (max. 8) • Transfer parameter sets to other INVEOR (product example only)

€175.45*
Details
External fan unit size 71
External fan unit size 71
External fan, External fan unit, Motor size 71 Isoclass F, Protection class IP56, Weight 2.7 kg, Multivoltage. 1x230 V-50 Hz, 35 watts, 0.19 A, 2950 rpm, 52 m3/h, capacitor 3µF1x240 V-60 Hz, 45 watts, 0.21 A, 3500 rpm, 52 m3/h, capacitor 3µF3x230/400 V-50 Hz, 30 watts, 0.19 A/0.12 A, 2900 rpm, 52 m3/h3x 254/460 V-60 Hz, 40 watts, 0.19/0.11, 3500 rpm, 52 m3/hPainted RAL5010, total length 185 mm, inner diameter 136 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From €179.69*
Details
Right-left-turn switch for VFD
Right-left-turn switch for VFD
Right-left rotation switch with potentiometer and emergency stop in a plastic housing. Switch not latching. External frequency converter control. Potentiometer connection solder contacts 1 NO contact each for left and right rotation Housing dimensions in mm (WxHxD): 160x80x55 Color: similar to RAL7035 Potentiometer: 2.2k / 2W, rotation angle 270 °, rotary knob : 32mm cable gland: M16, clamping range 5-10mm degree of protection: IP65, for connection in the control circuit Optionally without or with 1m, 3m or 5m cable (wired). Please choose version. All product photos are non-binding examples!

From €382.79*
Details
EASYdrive Touch operating terminal
EASYdrive Touch operating terminal
Touch operator terminal for EASYdrive frequency converter The 7" touch operator terminal in dark gray is specially designed foroperating and monitoring tasks in all areasof industrial automation. The fanlesssystem with 32-bit Cortex A8 processor and 600 MHzclock has plenty of computing power and impresses withpleasantly fast page switching. The "EasyBuilder Pro" configuration software does not place any specialrequirements on your PC, is easy to use andis available free of charge. Écran graphique LCD TFT 7" 800 x 480 pixels Rétroéclairage LED Boîtier en plastique robuste Système de refroidissement sans ventilateur Horloge en temps réel RTC IP65 à l'avant, conforme NEMA4 Ethernet 10/100 BaseTX RS485 Hôte USB  

€529.66*
Details
EASYdrive CANopen
EASYdrive CANopen
CANopen interface card for EASYdrive. The CANopen bus system belongs to the fieldbus family and is based on the CAN bus (Controller Area Network). As a rule, the network is built up in a linear structure. The maximum data transfer rate on a CANopen bus can be up to 1 Mbit / s and depends on the cable length. A maximum of 127 participants may exist in the bus association. Including M12 connection cable open 2 m, M12 connector / open / CANopen / 5-pin / 2 m / A-coded. The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€50.75*
Details
Foot switch with metal housing F1-AU0-10V
Foot switch with metal housing F1-AU0-10V
Rated operational Voltage Ue 12-26 V DC Utilization category DC-13 Ue / Ie 12-26 DC / 0.2 A according to IEC / EN 60947-5-2 Voltage output (control range) 0- 10 V DC short-circuit protection device switching element permanent short-circuit u. overload-proof, clocking Protection class IIIM UB GND RL U-OUT U-OUT housing AL die-cast; Lid die-cast aluminum actuating elements foot pedal (PA) ambient temperature -30 ° C to +80 ° C contact type PNP closer, teachbar from 0.1 - 5.9 mm switching force pedal approx. 10 N (center of pedal) Mechanical life 10 x 106 switching cycles and switching frequency max. 50 / min; Fastening 2 M8 screws connection type screw connections (M3.5) number of connections 4, conductor cross sections solid 0.5 - 1.5 mm2 stranded wire with ferrule 0.5 - 1.5 mm2, cable entry 1 x M20 x 1.5 weight 1.5 kg, Protection class IP65 according to IEC / EN 60529 drawing ID: Z030  

€237.38*
Details
EASYdrive PROFINET
EASYdrive PROFINET
PROFINET interface card for EASYdrive The PROFINET bus system belongs to the fieldbus family. As a rule, the network is built up in a linear structure. The maximum data transfer rate on a PROFINET bus can be up to 100 Mbit / s. The fieldbus line is only connected via the two M12 connection sockets on the front. Please note that the incoming bus line is connected to the "In" socket and the outgoing line to the "Out" socket . If it is the last participant, the "Out" socket must be left blank - a terminating resistor is not required. Including M12 connecting cable 2 m, M12 connector / RJ45 connector / 4-pin / 2 m / D-coded. -The interface card is part of the converter and cannot be retrofitted. All product photos are non-binding examples! Technical changes reserved.

€357.62*
Details
This website uses cookies to ensure the best experience possible. More information...