Electric motor - MX3 112P- 5.5 kW- 2pol- B35

€417.07*

Prices incl. VAT plus shipping costs

Product number:

3X28130212A000

Shipping fees:

Article + Packaging

Downloads

Product information "Electric motor - MX3 112P- 5.5 kW- 2pol- B35"

Three-phase motor, Motor in reduced size, Power= 5.5 kW, Speed= 2 pole

Type= B35, Shaft= 28 x 60 mm, Voltage= 3 x 400/690 V-50 Hz, 3 x 460/795 V-60 Hz (± 5% according to VDE 0530),

Frequency= 50/60 Hertz, Efficiency class= IE3, Efficiency= 88,1%. Paint= RAL 5010 (gentian blue).

Degree of protection = IP55, Temperature sensor = 3 x PTC-Thermistors, Weight= 31,4 kg, Terminal box position = top (rotatable),

Cable glands = 1 x M25, 1 x M16, Housing = Die-cast aluminum, Insulation class = F (155°C),

Ball bearing= SKF, C & U, o. Equivalent, Cooling= axial fan (plastic), Motor feet= can be screwed or unscrewed.

The Motor in reduced size is suitable for frequency converter use and for both directions of rotation.

According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified

specialist personnel. For modifications or special designs please send inquiry.

Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!

We reserve the right to make technical changes.

Properties "Electric motor - MX3 112P- 5.5 kW- 2pol- B35"

Efficiency Class:	IE 3
Performance:	5,5 kW
Rotation speed:	3000 rpm / 2 polig
Type of construction:	B3 B5 (B35)

Accesories

Heating tape 100-132

Heating tape for a space heater for Electric motors size 100-112-132 The anti-condensation heater is used to prevent the formation of condensation to prevent during operational breaks.

€144.45*

Details

Frequency inverter LS0055-iS7-4-SPFD

Frequency inverter iS7 – the all-rounder 5.5 kW, 3x400V, 12A, Braking resistor, EMC filter, IP54 , DC reactor, with control panel. ● Constant torque / variable torque for normal load and heavy load operation● U/f and U/f PG control, sensorless vector control, vector control with sensor selectable● 150 MIPS high-speed DSP● Excellent performance and advanced features:Droop control (torque control)KEB protection (Kinetic Energy Buffering: storage of kinetic energy) Ride Through protection(Delay of undervoltage trip) Under Load Trip ProtectionPMSM function (Permanent Magnet Synchronous Motor) Vector control without feedbackPower Braking & Flux Braking Function Automatic Setting:Autotuning of static engine parameters ● Easy to use:simple start mode, user and macro group, multifunctional control panel● Sensorless control and parameter setting of the second motor● Available: IP54/UL Type 12 optional (0.75~22kW[1~30HP]) *● Integrated communication RS485 (LS Bus / Modbus RTU)● Integrated transistor for dynamic braking (0.75~22kW[1~30PS])● Integrated EMC filter and DC reactor optional:EMC filter (0.75~22kW[1~30HP]) / DC reactor (0.75~160kW[1~215HP])● Wide, graphic LCD control panel (6 different languages)● PLC PLC expansion card optional (Programmable Logic Control Card):Master-K platform (max. 14 inputs and max. 7 outputs)● Input/Output expansion card (optional):max. 11 inputs and max. 6 outputs● Optional communication:Profibus DP, DeviceNet, Modbus TCP, Rnet, LonWorks, CANopen, EtherNet/IP *● Software (Drive View) for monitoring and parameterization on the PC

€982.62*

Details

Frequency Inverter LS 0055S100-4EOFNS

Frequency inverter, VFD, 5.5 kW, IP20, 380V-400V-420V-480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€559.70*

Details

Rain cover BG112

Fan cover with rain protection roof for Electric motors in size 112. When ordering with an Electric motor, the rain protection cover is mounted directly on the JS Electric motor.

€76.84*

Details

PTC PTC thermistor tripping device

PTC thermistor tripping device, Motor protection, PTC evaluation AC 50/60Hz 115/120V-230/240V +-10% 3VA, IP20,1-9 PTC sensors according to DIN 44081, DIN 44082 in seriesContact: AC240V 2.5A C300- Dimensions: 68 x 33 x 53 mm (L x W x H)- Adapter for 35 mm standard rail- 2 holes for screw fasteningUL File No. E75899

€86.42*

Details

External fan unit size 112

External fan, External fan unit, Motor size 112 Isoclass F, Protection class IP56, Weight 3.7kg, Multivoltage. 1x230 V-50 Hz, 45 watts, 0.19 A, 2850 rpm, 229 m3/h, capacitor 3µF1x240 V-60 Hz, 65 watts, 0.28 A, 3350 rpm, 229 m3/h, capacitor 3µF3x230/400 V-50 Hz, 45 watts, 0.19 A/0.12 A, 2850 rpm, 229 m3/h3x 254/460 V-60 Hz, 70 watts, 0.21/0.12 A, 3300 rpm, 229 m3/hPainted RAL5010, total length 193 mm, inner diameter 217 mm To install the external fan it is necessary to remove the fan cover andremove the fan blade. If an extension cannot be used,the shaft has to be shortened. If ordered with a motor, the external fan can also be installedto be delivered. Please select version.

From €262.99*

Details

Frequency Inverter LS 0055S100-4EXFNS

Frequency inverter, 5.5 kW, 380V- 400V- 420V- 480V, IP66, built-in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€755.27*

Details

Cam switch left-zero-right

Cam switch up to 25A left-zero-right Reversing switch suitable for outdoor use Description: Rated current=25A, Operating voltage=400V, Housing=polycarbonate, Protection class=IP 65, Switching angle=60°L - 0 - R, Dimensions: 69 x 69 x 105 mm

€73.45*

Details

Motor-slide-plate IEC90-112

Electric motor slide plate in size IEC 90 to 112 Dimensions: 307 x 213 x 33mm (LxWxH)Weight capacity: 57kgWeight: approx. 3.2kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

€93.14*

Details

Motor-slide-plate IEC100-132

Electric motor slide plate in size IEC 100 to 132 Dimensions: 380 x 240 x 33mm (LxWxH)Weight capacity: 92kgWeight: approx. 4.5kgInstallation position: horizontal and vertical Electric motor slide bases are used to compensate for vibrations and friction that can lead to either slipping or unnecessary wear on electricmotors and belts. They will allow you to precisely adjust the mounted motors lateral position to the millimetre. The life span of the equipmentwill be maximised, therefore decreasing costs and increasing profits.All product photos are non-binding examples!

€113.04*

Details

Slide rails sice 100/112

Motor mounting rails for size 100- 112 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 395 mmSlide length: 302 mmWeight: approx. 3.5 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

€71.44*

Details

Slide rails sice 100-112-132

Motor mounting rails for size 100- 112- 132 Electric motors, with adjustable clamping blocks,made of galvanized sheet steel. Total length: 495 mmSlide length: 405 mmWeight: approx. 4,2 kgMotor slide rails are used for belt drive applications. The motor slide railsare made of a steel structure and galvanized. They enable the construction of the drivea simple alignment of the motor to the pulley. Slide rails are suitable for almost everyoneMotor types and are characterized by a flat and compact design.Delivery is in pairs. All product photos are non-binding examples!

€76.53*

Details

Incremental encoder FNC 50 H

Incremental encoder with torque support Power supply UB=4.75 – 30 VDC, max. pulse frequency=< 300 kHz Max. speed=5000 min-1, Output signals=90° shifted A and B, Pulses per revolution=1024, Temperature range=-20 °C - +85 °C Protection class=IP65, Connection cable=2 m, Hole 14 mm, If ordered with a motor, the encoder can also be delivered assembled. Please select version. All product photos are non-binding examples! Technical changes reserved.

From €177.31*

Details