KV003-71-4-0.37 kW-40 rpm Bevel Geared Motor

€532.70*

Prices incl. VAT plus shipping costs

Delivery time approx. 36 working days

Mounting position for gearmotors

Product number:

KV003205100353A000TM

Shipping fees:

Article + Packaging

Downloads

Product information "KV003-71-4-0.37 kW-40 rpm Bevel Geared Motor"

Bevel geared motor with IEC flange between gearbox and Electro motor

Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.

Power= 0,37 kW, Speed (n²)= 40 rpm, Ratio (i)= 35,34, Torque (M²)= 82 Nm,

Operating factor (fs)= 1,0, Type= B3, Hollow shaft= 20 mm, Weight= 16 kg, Paint= RAL5010.

Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).

The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.

The bevel gear can be operated in both directions and contains an oil filling on delivery.

According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel

perform. For modifications or special designs please send inquiry.

When ordering, please select the desired installation position.

Important instructions
This drive is a custom-made product. A resignation or revocation of the purchase is excluded!
All product photos are non-binding examples!

Properties "KV003-71-4-0.37 kW-40 rpm Bevel Geared Motor"

Performance:	0,37 kW
Rotation speed:	11 to 50 rpm
Series:	K-series
Torque:	51 to 100 Nm

Accesories

KV 00X output shaft, flange

Output shaft with key father for helical gear reducer KV002 and KV003. 20 x 40 mm The shaft is permanently installed and can only be ordered with geared motor + flange.. Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€35.55*

Details

Frequency inverter LS004M100

Frequency inverter , 0.4 kW, 230V, 2.4A, IP20, EMC filter integrated - EMC filter C2 - Potentiometer for speed control - Attachment to mounting plates or DIN rail - Side-by-side installation possible (2 mm distance between the FU) - Easy connection via RJ45 port - Standard IO: 3x DI, 1x DO, 1x AI (0-10V), 1x AO (0-10V) - Brake chopper for 1.5kW and 2.2kW versions - Overload capacity 150% for 1 min - Programming with DriveView9 operating software via RJ45 connection on the M100 (Advanced only! The standard version does not have an RJ45 interface! Please select version.) Excerpt from spec. Features: - DC braking - Jog operation - 3-wire operation - Dwell operation (dwell time operation) - Slip compensation - PID control - Energy saving operation - Speed search - Automatic restart 0.4kW frequency converter for 0.37 kW three-phase motor!

From €137.92*

Details

Frequency Inverter LS 0004S100-4EXFNS

Frequency inverter, 0.4 kW, 380V- 480V, IP66, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning. Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€503.11*

Details

KV 00X double output shaft

Double output shaft with key father for helical gear reducer KV002 and KV003. 20 x 40 mm The shaft is permanently installed and can only be ordered with geared motor All product photos are non-binding examples!

€39.71*

Details

KV 00X output flange

Output flange for helical gear reducer KV002 and KV003. All product photos are non-binding examples! Technical changes reserved.

€36.51*

Details

KV 00X double output shaft for flange

Double output shaft with key for bevel gearboxes KV002 and KV003. 20x40mm The shaft is permanently installed and can only be ordered with a geared motor + flange. All product photos are non-binding examples! Technical changes reserved.

€40.39*

Details

Frequency Inverter LS 0004S100-4EOFNS

Frequency inverter, VFD, 0.4kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3) 0.1-400Hz frequency output 1-15kHz carrier frequency Constant torque / Variable torque dual rating Selectable V/f and sensorless vector control Powerful torque at overall Speed range Fault history: Last 5 faults High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning Enhanced process PID control with Sleep & Wake-up functions Low leakage PWM algorism Available IP66 enclosure (0.4-22kW) as built-in option Built-in Dynamic braking transistor (0.75-22kW) Available EMC Filter & DC Reactor as built-in option Wide graphic LCD keypad (30-75kW) Remote control using external wide graphic LCD keypad Cooling fan On/Off control & Easy change Extension I/O boards (Optional): 11 max. inputs & 6 max outputs 0-10Vdc / -10-+10Vdc analog input Selectable PNP/NPN input signal Built-in RS485 (LS Bus / Modbus RTU) communication Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen Monitoring & commissioning PC based software tool (Drive View)

€270.89*

Details

KV 00X output shaft

Output shaft with key father for helical gear reducer KV002 and KV003. 20 x 40 mm The shaft is permanently installed and can only be ordered with geared motor Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€31.67*

Details

KV 00X torque arm

Torque arm for helical gear reducer KV002 and KV003. All product photos are non-binding examples! Technical changes reserved.

€40.39*

Details

Engine options

230V-Option 0.37 kW - 4pol for bevel gear reduzer motors

single-phase option in 1x230V-50Hz, for helical geared reducer motors with 0.37kW-Motor in 42pole version, with Operating and starting capacitor. ! Always operate drive only under load, starting torque lower than with three-phase motor ! ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examples! optional: On / off switch with reversing switch for left / right rotation, undervoltage release, Collar plug = 1 x 230 V, switching capacity = 16 A, ambient temperature = -5 ° C to + 40 ° C, Line between motor and switch housing = approx. 90 cm.

From €30.18*

Details

Brakemotor-Option 0.37 kW – 4pol for bevel gear reduzer motors

Brakemotor-Option 0.37 kW – 4pol for bevel gear reduzer motors. Brake= 6 Nm 230V with rectifire. ! Only surcharge for the Motor and only available in conjunction with associated three-phase geared motor ! All product photos are non-binding examplesAll product photos are non-binding examples!

€279.76*

Details