KV102-80-4-0.55 kW-223 rpm Bevel Geared Motor

€617.60*

Prices incl. VAT plus shipping costs

Delivery time approx. 36 working days

Mounting position for gearmotors

Product number:

KV102306100063A000TM

Shipping fees:

Article + Packaging

Downloads

Product information "KV102-80-4-0.55 kW-223 rpm Bevel Geared Motor"

Bevel geared motor with IEC flange between gearbox and Electro motor

Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530), Frequency= 50/ 60 Hertz.

Power= 0,55 kW, Speed (n²)= 223 rpm, Ratio (i)= 6,28, Torque (M²)= 22 Nm,

Operating factor (fs)= 4,0, Type= B3, Hollow shaft= 30 mm, Weight= 20 kg, Paint= RAL5010.

Temperature sensor= 3 x PTC- Thermistor, Operating mode = S1- (100 % cdf), Terminal box= top (rotatable).

The geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.

The bevel gear can be operated in both directions and contains an oil filling on delivery.

According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified personnel

perform. For modifications or special designs please send inquiry.

When ordering, please select the desired installation position.

Important instructions
This drive is a custom-made product. A resignation or revocation of the purchase is excluded!
All product photos are non-binding examples!

Properties "KV102-80-4-0.55 kW-223 rpm Bevel Geared Motor"

Performance:	0,55 kW
Rotation speed:	201 to 300 rpm
Series:	K-series
Torque:	11 to 25 Nm

Accesories

KV 10X output shaft

Output shaft with key father for helical gear reducer KV102 and KV103. 30 x 60 mm The shaft is permanently installed and can only be ordered with geared motorPlease indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€45.26*

Details

KV 10X torque arm

Torque arm for helical gear reducer KV102 and KV103. All product photos are non-binding examples! Technical changes reserved.

€53.03*

Details

KV 10X output shaft, flange

Output shaft with key father for helical gear reducer KV102 and KV103. 30 x 60 mm The shaft is permanently installed and can only be ordered with geared motor + flange.. Please indicate the installation side (starting from installation position M1). All product photos are non-binding examples!

€52.04*

Details

KV 10X double output shaft

Double output shaft with key father for helical gear reducer KV102 and KV103. 30 x 60 mm The shaft is permanently installed and can only be ordered with geared motor All product photos are non-binding examples!

€57.87*

Details

KV 10X output flange

Output flange for helical gear reducer KV102 and KV103. All product photos are non-binding examples! Technical changes reserved.

€62.72*

Details

KV 10X double output shaft for flange

Double output shaft with feather key for bevel gearboxes KV102 and KV103. 30x60mm The shaft is permanently installed and can only be ordered with a geared motor + flange. All product photos are non-binding examples! Technical changes reserved.

€59.81*

Details