MV-F002-90L-4 - 1.5 kW - 40 to 464 rpm spur gear + FU motor ED400

Helical gear motor with integrated Frequency inverter EASYdrive ED400

Power=1.5 kW, speed=40 to 464 rpm, gear ratio (i)=3.62, torque (M²)=36 Nm, service factor (fs)=1.5.
Design=B3 (B35 for an additional charge), shaft=20x40 mm, weight=29.4 kg, color=RAL5010,
Temperature sensor=3 x PTC thermistor.

When ordering, please select the desired installation position!

Frequency inverter
Power=1.5 kW, size=A, input voltage=3 x 400V +10% (three-phase), input frequency=50/60 Hz,
Output frequency=0- 400 Hz, EMC filter=C2, protection class=IP65, dimensions=233mm x 153mm x 120mm,
Mains current (input)=3.3 A. Ideal control range=5-60 Hz, with constant nominal torque, below 30 Hz
An external fan is required for cooling.

Product Information
The Frequency inverter optionally offers the possibility of becoming “bus-capable” with the help of fieldbus modules.
The EASYdrive offers CANopen, EtherCAT, Modbus (already included), Profibus, Profinet and Sercos
Compatibility with almost all common control environments. The customer can choose the bus system that is relevant to him
select and thus ideally integrate the EASYdrive into the control environment of your application.
The required optional control variant must be specified when ordering.
The EASYdrive drive controllers are CE, UL and CSA certified. The EASYdrive lasts without external filter measures
EMC class C2 (for 3-phase mains supply) or C1 (for 1-phase mains supply).

! Possible variant selection!

Product selection
When selecting the frequency inverter, it should be noted that there are 3 variants. Firstly, this includes the device
in standard version, secondly the device with a membrane keyboard and thirdly the device with an MMI control unit.

The “standard version frequency converter” shown is fully usable and includes a side-mounted
Potentiometer, but requires a corresponding control panel to control it.
To do this, one of the following options must be ordered:
- External control device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with membrane keyboard” contains a built-in potentiometer and offers the option of
Controlling the FU directly, such as start-stop, left-right running, etc.

One of the following options must also be ordered for parameterization:
- External control device (MMI with cable and plug)
- Interface cable for PC programming
- Bluetooth adapter

The variant "Frequency inverter with MMI control unit” does not require an optional control panel,
There is also a display in the device lid. The options mentioned can be used if necessary.

Important instructions
This drive is a custom-made product. Withdrawal or revocation of the purchase is excluded!
All product photos are non-binding examples!