Aufgrund der Feiertage bleibt unser Betrieb vom 27. bis 29. Dezember geschlossen. Der letzte Versandtag ist der 22. Dezember. In dringenden Fällen sind wir telefonisch unter der Mobilnummer +49 173 2493097 erreichbar.
Three-phase motor, Electric motor, power=0.55 kW, speed=4 poles,
Design=B14, shaft=14 x 30 mm, voltage=3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),
Frequency=50/60 Hertz, efficiency class=IE1, paint=RAL 7030 (gray) , flange=105 x 70 x 85 mm
Protection class=IP55, temperature sensor=3 x PTC thermistor, weight=6.5 kg, terminal box position=top (rotatable),
The Electric motor is for that Frequency inverter - Use and suitable for both directions of rotation.
According to VDE 0105 or IEC 364 is all work on the electric drive only from qualified people
to be carried out by qualified personnel.
Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!We reserve the right to make technical changes.
<p>worm gear, i=100, Shaft 24mm, Hollow shaft Ø 24mm, IEC input shaft 14 x 30 mm, flange Ø 105 x 70 x 85mm,
Weight: 4.1kg
! In order to select desired mounting position! No output shafts available !
Remainders - Only while stocks last!
Frequency inverter, 2.2 kW, IP20, 380V- 400V- 420V- 480V, built- in LED keypad, EMC filter (C3)
The inverter was in operation for a short time. It has slight signs of wear. A corner of the attachment has broken off at the back (see photo).
1 year warranty.
0.1-400Hz frequency output
1-15kHz carrier frequency
Constant torque / Variable torque dual rating
Selectable V/f and sensorless vector control
Powerful torque at overall Speed range
Fault history: Last 5 faults
High performances & functions: KEB (Kinetic Energy Buffering) protection, Ride Through (LV Trip Delay) protection, Under Load Trip protection, Power brake & Flux Brake function, Static motor parameter Auto-tuning
Enhanced process PID control with Sleep & Wake-up functions
Low leakage PWM algorism
Available IP66 enclosure (0.4-22kW) as built-in option
Built-in Dynamic braking transistor (0.75-22kW)
Available EMC Filter & DC Reactor as built-in option
Wide graphic LCD keypad (30-75kW)
Remote control using external wide graphic LCD keypad
Cooling fan On/Off control & Easy change
Extension I/O boards (Optional): 11 max. inputs & 6 max outputs
0-10Vdc / -10-+10Vdc analog input
Selectable PNP/NPN input signal
Built-in RS485 (LS Bus / Modbus RTU) communication
Communication boards (Optional): Profibus-DP, Ethernet, EtherCAT, Profinet, CANopen
Monitoring & commissioning PC based software tool (Drive View)
Worm gear motor,
Power= 0,12 kW,Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),Protection class= IP55, Isoclass= F (155 °C), Operating mode= S1- (100% cdf), Speed (n²)= 130 rpm, Ratio (i)= 10,5, Torque= 7 Nm, Service factor (fs)= 5,6,
Hollow shaft= 20mm. Wight= 6,1kg, Paint= RAL 5010 (gentian blue), Temperature sensor = 3 x PTC thermistor, Housing= Die-cast aluminum, Ball bearing= SKF, C & U o. equivalent, Cooling= axial fan (plastic). The worm geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The geared motor can be operated in both directions and contains an oil filling on delivery! According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples!
Worm gear motor, Power= 0,18 kW,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),
Protection class= IP55, Isoclass= F (155 °C), Operating mode= S1- (100% cdf), Speed (n²)= 64 rpm,
Ratio (i)= 21, Torque= 16 Nm, Service factor (fs)= 2,1, Hollow shaft= 20mm.
Wight= 6,7kg, Paint= RAL 5010 (gentian blue), Temperature sensor = 3 x PTC thermistor,
Housing= Die-cast aluminum, Ball bearing= SKF, C & U o. equivalent, Cooling= axial fan (plastic).
The worm geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The geared motor can be operated in both directions and contains an oil filling on delivery!
According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out
by qualified specialist personnel. For modifications or special designs please send inquiry.
All product photos are non-binding examples!
Worm gear motor,
Power= 0,18 kW,Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),Protection class= IP55, Isoclass= F (155 °C), Operating mode= S1- (100% cdf), Speed (n²)= 113 rpm, Ratio (i)= 12, Torque= 12 Nm, Service factor (fs)= 3,7,
Hollow shaft= 20mm. Wight= 6,7kg, Paint= RAL 5010 (gentian blue), Temperature sensor = 3 x PTC thermistor, Housing= Die-cast aluminum, Ball bearing= SKF, C & U o. equivalent, Cooling= axial fan (plastic). The worm geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The geared motor can be operated in both directions and contains an oil filling on delivery! According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples!
Worm gear motor,
Power= 0,18 kW,Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),Protection class= IP55, Isoclass= F (155 °C), Operating mode= S1- (100% cdf), Speed (n²)= 129 rpm, Ratio (i)= 10,5, Torque= 10 Nm, Service factor (fs)= 3,7,
Hollow shaft= 20mm. Wight= 6,7kg, Paint= RAL 5010 (gentian blue), Temperature sensor = 3 x PTC thermistor, Housing= Die-cast aluminum, Ball bearing= SKF, C & U o. equivalent, Cooling= axial fan (plastic). The worm geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008. The geared motor can be operated in both directions and contains an oil filling on delivery! According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified specialist personnel. For modifications or special designs please send inquiry. All product photos are non-binding examples!
Three-phase motor, Electric motor, Power= 3 kW, Speed= 2 pole
Type= B14, Shaft= 28 x 60 mm, Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),
Frequency= 50/60 Hertz, Efficiency class= IE3, Efficiency= 87,1%, Paint= RAL 5010 (gentian blue),
Degree of protection = IP55, Temperature sensor = 3 x PTC-Thermistors, Weight= 24 kg, Terminal box position = top (rotatable),
Cable glands = 1 x M25, 1 x M16, Housing = Die-cast aluminum, Insulation class = F (155°C),
Ball bearing= SKF, C & U, o. Equivalent, Cooling= axial fan (plastic), Motor feet= can be screwed or unscrewed.
The Electric motor is suitable for frequency converter use and for both directions of rotation.According to VDE 0105 bzw. IEC 364 all work on the electric drive must only be carried out by qualified
specialist personnel. For modifications or special designs please send inquiry.Helpful tips on electric motors can be found in the FAQ section. All product photos are non-binding examples!We reserve the right to make technical changes.
Brake motor, Power = 0,09 kW, Speed= 1500 Upm
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% gemäß VDE 0530),
without PTC Thermistor, Protection class= IP55, Bremse= 4 Nm, 230V with rectifier.
Terminal box position = top (rotatable), Housing = die cast aluminum, Insulation class = F (155 ° C), Shaft= 9 x 20 mm,
Ball bearing = SKF, C&U o. equivalent, Cooling = Axial fan (plastic), Motor feet = can be screwed on or unscrewed.
The Electric motor is suitable for use with frequency converters and complies with IEC 60034-30: 2008.
The spring-loaded brake brakes the Electro motor in de-energized state. In inverter mode, the brake is
resp. to control the brake rectifier externally. For manual unlocking, a manual override lever is optionally available.
The brake motor is suitable for both directions of rotation. All product photos are non-binding examples!
Refurbished Engine - 6 months warranty!
Brake motor, Power = 0,12 kW, Speed= 1000 UpmVoltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% gemäß VDE 0530), Temperature sensor = 3 x PTC thermistors, p> Color tone = RAL 5010 (gentian blue), Frequency = 50/60 hertz, Degree of protection = IP55, Brake= 4 Nm, 230V with rectifier. p> Terminal box position = top (rotatable), Housing = die cast aluminum, Insulation class = F (155 ° C), p> Ball bearing = SKF, C&U or equivalent, Cooling = Axial fan (plastic), Motor feet = can be screwed on or unscrewed. The Electric motor is suitable for use with frequency converters and complies with IEC 60034-30: 2008. The spring-loaded brake brakes the Electro motor in de-energized state. In inverter mode, the brake is resp. to control the brake rectifier externally. For manual unlocking, a manual override lever is optionally available. The brake motor is suitable for both directions of rotation. All product photos are non-binding examples! Technical changes reserved.
<Saw motor, Flat motor, 2.2 kW, 2800 Upm, 1 x 230 Volt,
Direction of rotation left, right-hand thread, Clambing flange with 25.4 mm mounting, Operating mode S6-40% ED
Construction type= B34, Voltage= 1 x 230 V-50 Hz, Degree of protection= IP55, Weight= 14.5 kg, Terminal box position= left,
According to VDE 0105 bzw. IEC 364 are all work on the electric drive only by qualified
to carry out specialized personnel. All product photos are non-binding examples!
Optionally available without brake, motorswitch with electronic brake or with spring-loaded brake
(please select design).
Worm gear motor Hollow shaft 24mm, Power= 0.37 kW,
Voltage= 3 x 230/400 V-50 Hz, 3 x 265/460 V-60 Hz (± 5% according to VDE 0530),
Protection class= IP55, Isoclass= F (155 °C), Operating mode= S1- (100% cdf), Speed (n²)= 27 rpm,
Ratio (i)= 51, Torque= 85 Nm, Service factor (fs)= 1.5, Hollow shaft= 24mm.
Wight= 12.6kg, Paint= RAL 5010 (gentian blue), Temperature sensor = 3 x PTC thermistor,
Housing= Die-cast aluminum, Ball bearing= SKF, C & U o. equivalent, Cooling= axial fan (plastic).
The worm geared motor is suitable for frequency converter operation and complies with IEC 60034-30: 2008.
The geared motor can be operated in both directions and contains an oil filling on delivery!
According to VDE 0105 or IEC 364 all work on the electric drive must only be carried out
by qualified specialist personnel.
All product photos are non-binding examples!
Frequency inverter, 4kW, 380V- 480V, 9,0A, IP20, including operation panel
V/f Control, Sensorless Vector Control selectable
PID-Control for expanded Proces Control
High Torque within complete motor Speed range
0,1-400Hz output frequency (1000Hz model on request )
1-15kHz base frequency
Input Voltage range -15% bis +10%
Fault history: last 5 faults
Analog input 0 to +10Vdc / -10 to +10Vdc
150% torque at 0,5Hz
Protection degree: IP20 , UL Typ 1 (Optional)
Torque Boost manual/automatic
Input signal PNP/NPN selectable
Control and parameter set for second motor
Brake chopper for dynamic braking as standard
Automatic setting : vector measurment of the motor and Autotuning
Bult-in communication RS485 (LS Bus / Modbus RTU)
Fan with On/Off-control, easy to replaceRemote control with external keypad and RJ5-cable (Option)
Enhanced functions:
Sleep & Wake-up function
Energy saving
KEB-protection (saving of kinetic energy)
Leckage current reduction
Software(Drive View) for monitoring and parameter setting via computer